Yes — you can turn almost any crank-or-strap roller shutter into an app-controlled, voice-activated upgrade by fitting a tubular motor or clipping an external driver over the chain. a fully supplied and installed premium package can reach roughly AUD $650 – $1000 per shutter.
Before you grab the ladder, know what “smart” really means: timed routines, one-tap remote control, integration with Google, Alexa, Siri or Matter, plus safety extras like obstacle sensing. Two upgrade paths dominate — replace the internal axle with a tubular motor, or clip a battery driver onto the existing winder. Torque, tube diameter, power source, hub needs, warranty, and the need for a licensed electrician on 240 V work all determine the best option. call us on 83692266
The guide below compares ten widely available kits for 2025 in Australia, rating each on features, ecosystem support, price and installation difficulty, so you can match the right motor to every shutter — and budget.
1. Classic Roller Shutters Adelaide – Factory-Direct Smart Motor Upgrade Package
If you’d rather skip ladders and wiring, this factory-direct service delivers a fully installed, warrantied smart roller shutter motor upgrade anywhere in Adelaide. 83692266
What it is & who it’s for
Classic Roller Shutters manufactures the motor tubes locally and sends a licensed crew to swap out your crank or strap. Ideal for homeowners wanting a same-day, zero-hassle automation with local after-sales support.
Key smart features offered
- Somfy RTS, OzRoll, or Enjoy motors matched to shutter size
- Remote, phone app, Google/Alexa/Siri voice control
- Schedules, scenes, child-lock
- Solar, clip-in battery, or 240 V mains power
- Built-in obstacle sensing
Price guide (parts & labour)
Motor kit only: $350–$650
Install labour: from $220 per shutter (discounts on 4+) (senior discounts)
Solar panel add-on: $130–$220
Free quote, 5 -year motor warranty.
Pros & things to consider
- Locally made; two-week turnaround
- Licensed electricians; one-visit install
- Installation limited to SA, but DIY kits ship nationwide
Real-world example
Glenelg job: strap shutter converted to Somfy RTS in two hours, cutting 25 minutes of daily winding.
2. Somfy Altus RTS + Connexoon Retrofit Kit
Somfy’s Altus RTS motor is a premium, ultra-reliable retrofit. Pair it with the Connexoon hub to jump from basic remote control to phone scheduling, scenes and voice commands—without replacing the whole shutter.
Overview & compatibility
Fits 50 mm or 60 mm tubes; drives shutters to 4 m² (see torque chart). RTS radio is in-built, so no extra cabling.
Smart ecosystem integration
Connexoon/Tahoma hub adds Wi-Fi and links Google, Alexa, IFTTT, Home Assistant, enabling geofencing and scenes.
Installation essentials
Runs on 230 V hard-wire, so AS/NZS 3000 mandates a licensed electrician. Set limits with the Somfy remote: hold ‘prog’, jog shutter, store top and bottom stops.
Cost breakdown
- Altus RTS motor: $420–$650
- Connexoon hub (one per home): $250
- Typical professional install: $250 per shutter
Pros & cons to highlight
- Ultra-quiet, 5-year warranty
- Large installer network, abundant spares
- Higher upfront cost; hub required for app control
3. OzSmartThings Matter Over Thread Roller Shade Driver Kit
A true no-tools option, this palm-sized driver simply clamps over the beaded chain or cord loop that winds many indoor roller blinds and lightweight outdoor café blinds. Because the motor sits outside the pelmet, you never touch the axle, making it renter-friendly and strata-safe.
Product in a nutshell
- External clamp-on motor with 4–6 kg rated torque
- Rechargeable 2600 mAh Li-ion battery (USB-C)
- Optional stick-on solar panel to stay off the charger
Matter benefits
Thanks to Matter-over-Thread you pair directly with Apple Home, Google Home, Alexa or SmartThings—no proprietary bridge, no cloud log-ins, future-proof standard.
DIY installation walkthrough
- Fully charge battery
- Clip unit over chain and tighten grub screw
- Open app, run auto-calibrate top/bottom limits
Tip: keep chain tensioned during calibration to avoid slippage.
Price & ongoing costs
- Driver: $189–$249
- Solar trickle panel: $40
No electrician, no hub, virtually zero running cost.
Best suited for / limitations
Perfect for renters, apartments, and retrofit novices. Not suitable for heavy aluminium slat shutters over 2 m²—choose a tubular motor instead.
4. OzRoll E-Series Drive System Upgrade
A long-time favourite of South Australian installers, the OzRoll E-Series swaps the hand-crank for a 12 V tubular motor that hides inside the existing 40 mm axle. Because it runs on low voltage, you can install it yourself without calling an electrician—handy if your pelmet already has an access panel.
Snapshot of the kit
- Australian-made 12 V motor with clip-out Li-ion battery pack
- Two-button RF handset pre-paired at the factory
- Universal adaptors for most aluminium and steel tubes
Power & smart add-ons
- Choose plug-pack, slide-in battery, or bolt-on solar trickle charger
- Add the O-Sun Wi-Fi hub (≈ $95) for app control and Google/Alexa voice commands
DIY install in three steps
- Remove old strap box and snake the tape out (mind sharp edges).
- Slide motor into axle, click limiting collar, secure brackets—watch for pinching.
- Use the RF remote: press “up” + “stop” to record top, “down” + “stop” for bottom.
Cost guide
- Motor + controller: $320–$480 + wall plate $12 + charger for handset $28
- Solar panel: $220
- Pro install (if you’d rather not DIY): $150–$200 per shutter
Pros & cautions
- No 240 V wiring, battery swaps in seconds
- Solar option means zero recharging; otherwise expect a top-up every 12–18 months
- RF only out of the box—add the hub if you want full smart-home integration
5. Somfy Sonesse 30 Wire-Free Li-ion RTS Kit
Designed for rooms where noise is a deal-breaker, the Sonesse 30 packs Somfy’s whisper-quiet drive into a battery-powered tube that drops straight into most 40–50 mm roller shutter axles. The internal 2600 mAh lithium cell means zero cabling and, because it speaks Somfy RTS out of the box, you’re controlling the shutter minutes after the pelmet goes back on.
Quiet-operation USP
Rated < 38 dB at one metre—roughly a library whisper—making it perfect for nurseries, shift-worker bedrooms and media rooms.
Smart integration
Ships with a single-channel RTS handset; add a Tahoma or Connexoon hub later for Wi-Fi, Google, Alexa, Siri Shortcuts and energy-use tracking.
Installation & maintenance
Slide motor in, secure bracket, press PROG on the remote to learn top/bottom limits. Recharge via USB-C every 9–12 months; a full top-up takes about two hours.
Pricing
- Motor kit: $440–$630
- Optional micro-remote (key-ring size): $70
- + Labour if needed 83692266
When it shines & drawbacks
Ultra-quiet, cable-free and covered by a five-year warranty. Limited to shutters ≤ 2.2 m² (≈ 2 Nm torque) and replacement batteries are proprietary.
6. HomeAutomation & Tubular Motors AU “Plug-in RF + Wi-Fi Bridge Combo”
Looking for a mid-price motor that slots straight into the shutter tube and a ready-made path to app control? This combo from HomeAutomation & Tubular Motors AU arrives pre-paired, so you’re rolling the moment you plug it into a nearby power point—no electrician, no limit-setting headaches.
Package contents
- 50 mm RF tubular motor (choose 10 Nm or 20 Nm)
- Single-channel RF wall/hand remote
- BroadLink RM-Mini Wi-Fi bridge
- Star adaptors, bearing and mounting brackets
Smart capability
The BroadLink bridge converts the RF commands to Wi-Fi, unlocking the BroadLink, Alexa, Google Home and IFTTT apps. Schedule heat-dumping closes at 2 pm on 40 °C days or automate sunrise opens—no proprietary hub required.
Technical fit
Rated for shutters up to roughly 3.5 m wide. The 1.8 m 240 V lead means you can simply plug into an existing GPO; if none is close, you’ll need an electrician to hard-wire.
Pricing
Bundle $235–$355
Extra RF remote $
30-day returns and step-by-step video guides are included.
Why pick this kit
A sweet spot between bare-bones DIY and high-end Somfy: decent torque, local stock, flexible smart integration. Downside? The separate bridge adds one more gadget to power and keep on Wi-Fi.
Quick Takeaway
Smart roller shutter motor upgrade kits in 2025 span every budget and skill-level.
DIY clamp-on drivers such as the OzSmartThings Matter unit start around $120 and can be fitted with nothing more than a USB charger for indoor blinds. Mid-range tubular motors that plug into a nearby GPO sit in the $200–$350 bracket, while hard-wired premium brands like Somfy are $variable pricing depending on the motor and torque for the motor alone. Add electrician labour (≈ $250) and your all-in cost can touch $600-$900 per shutter, especially if you bundle hubs, remotes and solar chargers.
Choose your path by ticking four boxes:
- shutter weight and tube diameter
- preferred smart ecosystem (RTS, Tuya, Matter, Zigbee, etc.)
- power source: battery, plug-in 240 V, solar, or fully hard-wired
- warranty length and local after-sales support
If you’re in Adelaide and would rather someone else juggle torque charts and wiring diagrams, book a free on-site quote with the team at Classic Roller Shutters Adelaide. They’ll match the right motor to every opening and handle the paperwork, too. 83692266 affordable pricing
